XS916MX Series Installation Guide for Stand-alone Switches
25
LEDs
This section describes the functions of the LEDs.
LEDs for the
Twisted Pair
Ports
The twisted pair ports on the XS916MX series switch has one status LED
that displays link and activity information. The LEDs are shown in Figure 5.
Figure 5. LEDs for the Twisted Pair Ports on the XS916MX Series Switch
The Port LEDs are described in Table 2.
LEDs for the SFP
Slots
The LEDs for the SFP slots are located between the slots, as shown in
Figure 6 on page 26. Each SFP slot has one LED. The left-hand LED is for
the top slot and the right-hand LED is for the bottom slot.
Table 2. LEDs on the Twisted Pair Ports on the XS916MX Series Switch
LED State Description
L/A LED
Solid Green A port has established a 10Gbps link to a
network device.
Flashing
Green
A port is transmitting or receiving data at
10Gbps.
Solid Amber A port has established a 100 or 1000 Mbps
link to a network device.
Flashing
Amber
A port is transmitting or receiving data at
100 or 1000 Mbps.
Off A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
Status LED for the Top Port
Status LED for the Bottom Port
To Next Page
Loading...
