Chapter 1: Overview
26
Figure 6. SFP Slot LEDs
The LEDs are described in Table 3.
LEDs for the
Stacking Slots
Slots S1 and S2 are stacking slots for the VCStack feature. You can use
the slots to build a virtual switch of two switches. For background
information, refer to the XS916MX Series Installation Guide for VCStack.
Table 4 on page 27 defines the LED states when the slots contain
stacking transceivers.
Table 3. SFP Slot LEDs on the XS916MX Series Switch
LED State Description
L/A LED
Off The slot is empty, the SFP transceiver
has not established a link to a network
device, or the LEDs are turned off. To turn
on the LEDs, use the eco-friendly button.
Solid Amber The SFP/SFP+ transceiver has
established a 1Gbps link to a network
device.
Flashing
Amber
The SFP transceiver is receiving or
transmitting data at 1Gbps.
Solid Green The SFP/SFP+ transceiver has
established a 10Gbps link to a network
device.
Flashing
Green
The SFP transceiver is receiving or
transmitting data at 10Gbps.
Status LED for the Top Port
Status LED for the Bottom Port
To Next Page
Loading...
