Allied Telesis AT-XS916MXT - Installing the Switch on a Wall

Chapter 3: Installing the Switch
46
Installing the Switch on a Wall
The XS916MX series switch must be mounted on the wall in portrait
orientation with the front panel facing left or right. See Figure 16.
Figure 16. Positions of the XS916MX Series Switch on a Wall
What to Prepare
for Wall
Installation
You need the following items to install the switch on a wall:
 Wall mount bracket kit, which comes with the switch
 Flat-head screwdriver
 Cross-head screwdriver
 Drill
Note
You must provide flat-head and cross-head screwdrivers and a drill.