Allied Telesis IE340-20GP - show ip route summary

C613-50631-01 Rev A Command Reference for IE340 Series 1015
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ROUTING COMMANDS
SHOW
IP ROUTE SUMMARY
show ip route summary
Overview This command displays a summary of the current RIB (Routing Information Base)
entries.
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
Syntax
show ip route summary
Mode User Exec and Privileged Exec
Example To display a summary of the current RIB entries, use the command:
awplus# show ip route summary
Output Figure 25-4: Example output from the show ip route summary command
Related
commands
show ip route
show ip route database
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 5
ospf 2
Total 8