Allied Telesis IE340-20GP - route (RIP)

C613-50631-01 Rev A Command Reference for IE340 Series 1060
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIP COMMANDS
ROUTE
(RIP)
route (RIP)
Overview Use this command to add a static RIP route.
Use the no variant of this command to remove a static RIP route.
Syntax
route <ip-addr/prefix-length>
no route <ip-addr/prefix-length>
Default No static RIP route is added by default.
Mode RIP Router Configuration
Usage notes Use this command to add a static RIP route. After adding the RIP route, the route
can be checked in the RIP routing table.
Example To create a static RIP route to IP subnet 192.168.1.0/24, use the following
commands:
awplus# configure terminal
awplus(config)# router rip
awplus(config-router)# route 192.168.1.0/24
Related
commands
show ip rip
clear ip rip route
Parameter Description
<ip-addr/prefix-length> The IPv4 address and prefix length.