Allied Telesis IE340-20GP - disable (Privileged Exec mode)

C613-50631-01 Rev A Command Reference for IE340 Series 118
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CLI NAVIGATION COMMANDS
DISABLE
(PRIVILEGED EXEC MODE)
disable (Privileged Exec mode)
Overview This command exits the Privileged Exec mode, returning the prompt to the User
Exec mode. To end a session, use the exit command.
Syntax
disable
Mode Privileged Exec
Example To exit the Privileged Exec mode, enter the command:
awplus# disable
awplus>
Related
commands
enable (Privileged Exec mode)
end
exit