C613-50631-01 Rev A Command Reference for IE340 Series 1256
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
IPV
6 OSPF NEIGHBOR
Examples To configure a neighbor with a priority value, poll interval time, and cost, use the
commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# ipv6 ospf neighbor fe80::c:20:0:1 priority 1
poll-interval 90
awplus(config-router)# ipv6 ospf neighbor fe80::c:20:0:1 cost
15
Related
commands
show ipv6 ospf neighbor
To Next Page
Loading...
