Allied Telesis IE340-20GP - bgp rfc1771-path-select (BGP only)

C613-50631-01 Rev A Command Reference for IE340 Series 1350
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
BGP
RFC1771-PATH-SELECT (BGP ONLY)
bgp rfc1771-path-select (BGP only)
Overview Use this command to set the RFC1771 compatible path selection mechanism.
Use the no variant of this command to revert this setting.
Syntax
bgp rfc1771-path-select
no bgp rfc1771-path-select
Default Industry standard compatible path selection mechanism.
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# bgp rfc1771-path-select
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series