Allied Telesis IE340-20GP - show ip igmp snooping source-timeout

C613-50631-01 Rev A Command Reference for IE340 Series 1706
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
IP IGMP SNOOPING SOURCE-TIMEOUT
show ip igmp snooping source-timeout
Overview Use this command to display the configured IGMP snooping source timeouts for a
specified VLAN or VLAN range.
Syntax
show ip igmp snooping source-timeout [interface|
<interface-range>]
Mode Privileged Exec
Example To display the configured IGMP snooping source timeouts for all VLANs, use the
command:
awplus# show ip igmp snooping source-timeout
Output Figure 32-10: Example output from show ip igmp snooping source-timeout
Related
commands
ip igmp snooping source-timeout
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
Parameter Description
<interface-range> The name of the VLAN interface or VLAN range
awplus#show ip igmp snooping source-timeout 
Global IGMP snooping source-timeout is enabled (60 secs)

vlan1 enabled (300 secs)
vlan2 inherits global setting
vlan1000 inherits global settingawplus#show ip igmp
snooping source-timeout int vlan1
Global IGMP snooping source-timeout is enabled (60 secs)vlan1
enabled (300 secs)