Allied Telesis IE340-20GP - show ip pim sparse-mode packet statistics

C613-50631-01 Rev A Command Reference for IE340 Series 1840
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE PACKET STATISTICS
show ip pim sparse-mode packet statistics
Overview Use this command to display the current packet receive counts for PIM
sparse-mode.
Syntax
show ip pim sparse-mode packet statistics
Mode Privileged Exec
Example The following command displays the current packet receive counts for PIM
sparse-mode:
awplus# configure terminal
awplus(config)# show ip pim sparse-mode statistics
Output Figure 35-16: Example output from show ip pim sparse-mode statistics
Related
commands
clear ip pim sparse-mode packet statistics
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
awplus(config)#show ip pim sparse-mode statistics 
PIM-SM Receive Packet Statistics :
All PIM-SM : Total : 25 Valid : 25
Hello : Total : 14 Valid : 14
Register : Total : 5 Valid : 5
Register Stop : Total : 0 Valid : 0
Join/Prune : Total : 0 Valid : 0
Bootstrap : Total : 6 Valid : 6
Assert : Total : 0 Valid : 0
Candidate-RP : Total : 0 Valid : 0