Allied Telesis IE340-20GP - show ip pim sparse-mode rp mapping

C613-50631-01 Rev A Command Reference for IE340 Series 1842
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE RP MAPPING
show ip pim sparse-mode rp mapping
Overview Use this command to show group-to-RP (Rendezvous Point) mappings, and the RP
set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode rp mapping
Mode Privileged Exec
Example
awplus# show ip pim sparse-mode rp mapping
Output Figure 35-18: Example output from show ip pim sparse-mode rp mapping
Related
commands
show ip pim sparse-mode rp-hash
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
PIM Group-to-RP Mappings
Group(s): 224.0.0.0/4
RP: 10.10.0.9
Info source: 10.10.0.9, via bootstrap, priority 192
Uptime: 16:52:39, expires: 00:02:50