Allied Telesis IE340-20GP - debug pim dense-mode fsm

C613-50631-01 Rev A Command Reference for IE340 Series 1912
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
DEBUG
PIM DENSE-MODE FSM
debug pim dense-mode fsm
Overview This command enables debugging of Finite-State Machine (FSM) specific
information of all Multicast Routing Table (MRT) and MRT Virtual Multicast
Interface (MRT-VIF) entries.
The no variant of this command disables debugging of Finite-State Machine (FSM)
specific information of all Multicast Routing Table (MRT) and MRT Virtual Multicast
Interface (MRT-VIF) entries.
Syntax
debug pim dense-mode fsm
no debug pim dense-mode fsm
Mode Privileged Exec and Global Configuration
Example
awplus# configure terminal
awplus(config)# debug pim dense-mode fsm
Related
commands
debug pim dense-mode all
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif