Allied Telesis IE340-20GP - debug pim dense-mode vif

C613-50631-01 Rev A Command Reference for IE340 Series 1916
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
DEBUG
PIM DENSE-MODE VIF
debug pim dense-mode vif
Overview This command enables debugging of VIF handling.
The no variant of this command disables debugging of VIF handling.
Syntax
debug pim dense-mode vif
no debug pim dense-mode vif
Mode Privileged Exec and Global Configuration
Example
awplus# configure terminal
awplus(config)# debug pim dense-mode vif
Related
commands
debug pim dense-mode all
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm