Allied Telesis IE340-20GP - show class-map

C613-50631-01 Rev A Command Reference for IE340 Series 2149
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
CLASS-MAP
show class-map
Overview Use this command to display the QoS class-maps’ criteria for classifying traffic.
Syntax
show class-map [<class-map-name>]
Mode User Exec and Privileged Exec
Example To display a QoS class-map’s match criteria for classifying traffic, use the command:
awplus# show class-map cmap1
Output Figure 42-2: Example output from the show class-map command
Related
commands
class-map
Parameter Description
<class-map-name> Name of the class-map.
awplus#show class-map

CLASS-MAP-NAME: myClass
Match Mac Type: 2 l2mcast

CLASS-MAP-NAME: default