Allied Telesis IE340-20GP - show mls qos interface storm-status

C613-50631-01 Rev A Command Reference for IE340 Series 2157
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE STORM-STATUS
show mls qos interface storm-status
Overview Show the current configuration and status of the QoS Storm Protection (QSP) on
the given port.
Syntax
show mls qos interface <port> storm-status
Mode User Exec and Privileged Exec
Example To see the QSP status on port1.0.1, use the command:
awplus# show mls qos interface port1.0.1 storm-status
Output Figure 42-7: Example output from show mls qos interface storm-status
Related
commands
storm-action
storm-downtime
storm-protection
storm-rate
storm-window
Parameter Description
<port> Switch port.
Interface: port1.0.1
Storm-Protection: Enabled
Port-status: Enabled
Storm Action: vlandisable
Storm Window: 5000 ms
Storm Downtime: 0 s
Timeout Remaining: 0 s
Last read data-rate: 0 kbps
Storm Rate: 1000 kbps