Allied Telesis IE340-20GP - Page 2190

C613-50631-01 Rev A Command Reference for IE340 Series 2190
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
802.1X COMMANDS
DOT
1X PORT-CONTROL
To enable port authentication force authorized on the interface port1.0.2, use the
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# dot1x port-control force-authorized
To disable port authentication on the interface port1.0.2 use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no dot1x port-control
To enable port authentication on authentication profile ‘student’, use the
commands:
awplus# configure terminal
awplus(config)# auth profile student
awplus(config-auth-profile)# dot1x port-control auto
Related
commands
aaa authentication dot1x
auth profile (global)
show dot1x interface
Command
changes
Version 5.4.9-2.1: command added to AR2050V, AR3050S, and AR4050S