Allied Telesis IE340-20GP - clear radius dynamic-authorization counters

C613-50631-01 Rev A Command Reference for IE340 Series 2430
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RADIUS COMMANDS
CLEAR
RADIUS DYNAMIC-AUTHORIZATION COUNTERS
clear radius dynamic-authorization
counters
Overview Use this command to set the Dynamic Authorization message counters to zero.
Syntax
clear radius dynamic-authorization counters
Mode Privileged Exec
Example To set the Dynamic Authorization message counters to zero, use the command:
awplus# clear radius dynamic-authorization counters
Related
commands
radius dynamic-authorization-client
show radius dynamic-authorization counters
Command
changes
Version 5.5.1-1.1: command added