Allied Telesis IE340-20GP - radius-server local

C613-50631-01 Rev A Command Reference for IE340 Series 2489
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
RADIUS
-SERVER LOCAL
radius-server local
Overview Use this command to navigate to the Local RADIUS server configuration
mode(config-radsrv) from the Global Configuration mode (config).
Syntax
radius-server local
Mode Global Configuration
Example Local RADIUS Server commands are available from config-radsrv
configuration mode. To change mode from User Exec mode to the Local RADIUS
Server mode (config- radsrv), use the commands:
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)#
Output
Related
commands
server enable
show radius local-server group
show radius local-server nas
show radius local-server statistics
show radius local-server user
awplus(config)#radius-server local
Creating Local CA repository.....OK
Enrolling Local System to local trustpoint..OK
awplus(config-radsrv)#