Allied Telesis IE340-20GP - G.8032 Ethernet Ring Protection Switching Commands; Introduction

55
C613-50631-01 Rev A Command Reference for IE340 Series 2698
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 Ethernet
Ring Protection
Switching
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
G.8032 Ethernet Ring Protection Switching.
For more information, see the G.8032 Ethernet Ring Protection Switching Feature
Overview and Configuration Guide.
Command List •“cfm-sf-notify” on page 2700
•“clear g8032 erp-instance” on page 2702
•“clear g8032 erp-instance statistics” on page 2704
•“data-traffic” on page 2705
•“debug g8032” on page 2707
•“enable (g8032-profile)” on page 2708
•“epsr topology-change” on page 2709
•“erp-instance” on page 2710
•“g8032 erp-instance” on page 2711
•“g8032 forced-switch erp-instance” on page 2713
•“g8032 manual-switch erp-instance” on page 2715
•“g8032 physical-ring” on page 2716
•“g8032 profile” on page 2718
•“level (g8032-switch)” on page 2719
•“physical-ring” on page 2720
•“profile name” on page 2721
•“raps-channel” on page 2722
•“service onm” on page 2723