Allied Telesis IE340-20GP - atmf retry guest-link

C613-50631-01 Rev A Command Reference for IE340 Series 2860
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
RETRY GUEST-LINK
atmf retry guest-link
Overview Use this command to retry an AMF guest-link by restarting AMF guest discovery on
a port if it is currently in the failed state.
If no port is specified then all configured AMF guest-link ports that are in the failed
state are retried.
If a port is specified then that port will only be retried if it is both:
• configured as an AMF guest-link, and
• it is currently in the failed state.
Syntax
atmf retry guest-link [<interface>]
Mode Privileged Exec
Example To retry all configured AMF guest-link currently in a failed state, use the command:
awplus# atmf retry guest-link
To retry an AMF guest-link configured on port1.0.2 currently in a failed state, use
the command:
awplus# atmf retry guest-link port1.0.2
Related
commands
show atmf links guest
switchport atmf-guestlink
Parameter Description
<interface> Name of the interface the guest-link you want to retry is
configured on.