C613-50631-01 Rev A Command Reference for IE340 Series 2994
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF NODES
show atmf nodes
Overview This command displays nodes currently configured within the AMF network.
Note that the output also tells you whether or not node map exchange is active.
Node map exchange improves the tracking of nodes joining and leaving an AMF
network. This improves the efficiency of AMF networks. Node map exchange is
only available if every node in your AMF network is running version 5.4.6-2.1 or
later. We recommend running the latest version on all nodes in your network, so
you receive the advantages of node map exchange and other improvements.
Syntax
show atmf nodes [guest|all]
Mode Privileged Exec
Usage notes You can use this command to display one of three sets of nodes:
• all nodes except guest nodes, by specifying show atmf nodes
• all nodes including guest nodes, by specifying show atmf nodes all
• only guest nodes, by specifying show atmf nodes guest
Examples To display AMF information for all nodes except guest nodes, use the command:
node1# show atmf nodes
Parameter Description
guest Display only guest nodes in the AMF network.
all
Display all nodes in the AMF network, including guest nodes.
Table 57-1: Sample output from show atmf nodes
node1#show atmf nodes guest
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device ATMF Parent Node
Name Type Master SC Domain Depth
--------------------------------------------------------------------------------
* M1 x510-28GTX Y S none 0
N3 x230-18GP N N M1 1
N1 AR4050S N N M1 1
Node map exchange is active
Current ATMF node count 3
To Next Page
Loading...
