Allied Telesis IE340-20GP - show atmf secure-mode certificates

C613-50631-01 Rev A Command Reference for IE340 Series 3003
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF SECURE-MODE CERTIFICATES
show atmf secure-mode certificates
Overview Use this command to display the certificate status details when secure mode is
enabled on an AMF network.
Syntax
show atmf secure-mode certificates [detail] [area <area-name>]
[node <node-name>]
Mode Privileged Exec
Example To display AMF secure mode certificates on a master or member node, use the
command:
awplus# show atmf secure-mode certificates
To display detailed information about AMF secure mode certificates for a node
named “area_2_node_1” in an area named “area-2”, use the command:
awplus# show atmf secure-mode certificates detail area area-2
node area_2_node_1
Output Figure 57-37: Example output from show atmf secure-mode certificates
Parameter Description
detail Display detailed certificate information.
area Specify an AMF area.
<area-name> The AMF area you want to see the certificate information for.
node Specify an AMF node.
<node-name> The AMF node you want to see information for.
Area-1 Certificates:
Node Name Signer Expires Status
------------------------------------------------------------------------------
area_1_node_1 master_1 11 Mar 2017 
master_2 4 Mar 2017 Active
area_1_node_2 master_1 11 Mar 2017 
master_2 4 Mar 2017 Revoked

Area-2 Certificates:
Node Name Signer Expires Status
------------------------------------------------------------------------------
area_2_node_1 master_1 18 Mar 2017 Active
area_2_node_2 master_1 18 Mar 2017 Rejected