Allied Telesis IE340-20GP - type atmf guest

C613-50631-01 Rev A Command Reference for IE340 Series 3030
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
TYPE
ATMF GUEST
type atmf guest
Overview This command configures a trigger to activate when an AMF guest node joins or
leaves.
Syntax
type atmf guest {join|leave}
Mode Trigger Configuration
Example To configure trigger 86 to activate when an AMF guest node leaves, use the
following commands:
awplus(config)# trigger 86
awplus(config-trigger)# type atmf guest leave
Related
commands
show trigger
Command
changes
Version 5.5.1-1.1: command added
Parameter Description
join AMF guest node joins.
leave AMF guest node leaves.