C613-50631-01 Rev A Command Reference for IE340 Series 3053
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
IP
DHCP-CLIENT DEFAULT-ROUTE DISTANCE
To set the AD for the default route back to the default value of 1, use the
commands:
awplus# configure terminal
awplus(config)# interface vlan10
awplus(config-if)# no ip dhcp-client default-route distance
Related
commands
show ip route
show ip route database
Command
changes
Version 5.4.7-0.2 Command added.
To Next Page
Loading...
