Allied Telesis IE340-20GP - show system environment

C613-50631-01 Rev A Command Reference for IE340 Series 315
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM ENVIRONMENT
show system environment
Overview This command displays the current environmental status of your device and its
power supplies and any other expansion options. The environmental status covers
information about temperatures, fans, and voltage.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show system environment
Mode User Exec and Privileged Exec
Example To display the system’s environmental status, use the command:
awplus# show system environment
Output Figure 7-20: Example output from show system environment
If PoE is disabled on a PoE-capable switch, the voltage low limit changes to 18V.
Related
commands
show system
show system environment counters
trigger
type env-sensor
awplus#show sys environment
Environment Monitoring Status

Overall Status: Normal

Resource ID: 1 Name: IE340-20GP
ID Sensor (Units) Reading Low Limit High Limit Status
1 Temp: System (Degrees C) 29 85(Hyst) 90 Ok
2 Voltage: Input 1 (Volts) 53.686 46.000 57.000 Ok
3 Voltage: Input 2 (Volts) 53.686 46.000 57.000 Ok
4 Almmon: LED Output No - - Ok
5 Contact Input 1 Open - - Ok
6 Almmon: Relay Output 1 Closed - - Ok
7 Power Input 1 No - - Ok
8 Power Input 2 No - - Ok