C613-50631-01 Rev A Command Reference for IE340 Series 3152
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
NTP COMMANDS
SHOW
NTP COUNTERS
show ntp counters
Overview This command displays packet counters for NTP.
Syntax
show ntp counters
Mode Privileged Exec
Example To display counters for NTP use the command:
awplus# show ntp counters
Figure 60-1: Example output from show ntp counters
awplus#show ntp counters
Server Received 4
Server Dropped 0
Client Sent 90
Client Received 76
Client Valid Received 76
Table 60-3: Parameters in the output from show ntp counters
Parameter Description
Server
Received
Number of NTP packets received from NTP clients.
Server Dropped Number of NTP packets received from NTP clients but dropped.
Client Sent Number of NTP packets sent to servers.
Client
Received
Number of NTP packets received from servers
Client Valid
Received
Number of valid NTP packets received from servers.
To Next Page
Loading...
