Allied Telesis IE340-20GP - show snmp-server group

C613-50631-01 Rev A Command Reference for IE340 Series 3182
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SNMP COMMANDS
SHOW
SNMP-SERVER GROUP
show snmp-server group
Overview This command displays information about SNMP server groups. This command is
used with SNMP version 3 only.
Syntax
show snmp-server group
Mode Privileged Exec
Example To display the SNMP groups configured on the device, use the command:
awplus# show snmp-server group
Output Figure 62-7: Example output from the show snmp-server group command
Related
commands
show snmp-server
snmp-server group
SNMP group information:
Group name .............. guireadgroup
Security Level ........ priv
Read View ............. guiview
Write View ............ none
Notify View ........... none

Group name .............. guiwritegroup
Security Level ........ priv
Read View ............. none
Write View ............ guiview
Notify View ........... none