Allied Telesis IE340-20GP - show system pci device

C613-50631-01 Rev A Command Reference for IE340 Series 320
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM PCI DEVICE
show system pci device
Overview Use this command to display the PCI devices on your device.
Syntax
show system pci device
Mode User Exec and Privileged Exec
Example To display information about the PCI devices on your device, use the command:
awplus# show system pci device
Output Figure 7-24: Example output from the show system pci device command
Related
commands
show system environment
show system pci tree
awplus#show system pci device
00:00.0 Class 0600: 14e4:5300 (rev 01)
Subsystem: 14e4:5300
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at 18000000 (64-bit, non-prefetchable) [size=16K]
Memory at <unassigned> (64-bit, non-prefetchable) [size=128M]
Capabilities: [40] Power Management version 3
Capabilities: [58] #09 [0078]
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable
-
Capabilities: [d0] #10 [0041]

00:01.0 Class 0200: 14e4:b321 (rev 12)
Subsystem: 14e4:4d4c
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at 08000000 (64-bit, non-prefetchable) [size=256K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable
-
Capabilities: [a0] #11 [0000]
Capabilities: [ac] #10 [0002]