Allied Telesis IE340-20GP - description (ping-polling)

C613-50631-01 Rev A Command Reference for IE340 Series 3409
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PING-POLLING COMMANDS
DESCRIPTION
(PING-POLLING)
description (ping-polling)
Overview This command specifies a string to describe the ping-polling instance. This allows
the ping-polling instance to be recognized easily in show commands. Setting this
command is optional.
By default ping-poll instances do not have a description.
Use the no variant of this command to delete the description set.
Syntax
description <description>
no description
Mode Ping-Polling Configuration
Examples To add the text “Primary Gateway” to describe the ping-poll instance 45, use the
commands:
awplus# configure terminal
awplus(config)# ping-poll 45
awplus(config-ping-poll)# description Primary Gateway
To delete the description set for the ping-poll instance 45, use the commands:
awplus# configure terminal
awplus(config)# ping-poll 45
awplus(config-ping-poll)# no description
Related
commands
ping-poll
show ping-poll
Parameter Description
<description> The description of the target. Valid characters are any printable
character and spaces. There is no maximum character length.