Allied Telesis IE340-20GP - service profinet

C613-50631-01 Rev A Command Reference for IE340 Series 3455
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PROFINET COMMANDS
SERVICE
PROFINET
service profinet
Overview Use this command to enable the PROFINET service (protocol) on your device. Once
PROFINET is enabled, you can then proceed with other PROFINET configuration
commands.
Use the no variant of this command to disable the PROFINET service.
Syntax
service profinet
no service profinet
Default Disabled.
Mode Global Configuration
Example To enable the PROFINET service, use the commands:
awplus# configure terminal
awplus(config)# service profinet
To disable the PROFINET service, use the commands:
awplus# configure terminal
awplus(config)# no service profinet
Related
commands
show profinet status
Command
changes
Version 5.5.2-1.6 and 5.5.3-0.1: command added