Allied Telesis IE340-20GP - copy permanent-log

C613-50631-01 Rev A Command Reference for IE340 Series 410
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
COPY
PERMANENT-LOG
copy permanent-log
Overview Use this command to copy the permanent log to an internal or external
destination.
Syntax
copy permanent-log <destination-name>
Mode Privileged Exec
Example To copy the permanent log file into a folder in Flash named “perm-log” and name
the file “permanent-log.log”, use the command:
awplus# copy permanent-log flash:/perm-log/permanent-log.log
To copy the permanent log file onto a USB storage device and name the file
“permanent-log.log”, use the command:
awplus# copy permanent-log usb:/permanent-log.log
Related
commands
log permanent
show file systems
show log permanent
Command
changes
Version 5.4.7-1.1: command added
Parameter Description
<destination-name> The filename and path for the destination file. See
Introduction on page 137 for valid syntax.