Allied Telesis IE340-20GP - log console

C613-50631-01 Rev A Command Reference for IE340 Series 426
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
LOG
CONSOLE
log console
Overview This command configures the device to send log messages to consoles. The
console log is configured by default to send messages to the device’s main console
port.
Use the no variant of this command to configure the device not to send log
messages to consoles.
Syntax
log console
no log console
Mode Global Configuration
Examples To configure the device to send log messages use the following commands:
awplus# configure terminal
awplus(config)# log console
To configure the device not to send log messages in all consoles use the following
commands:
awplus# configure terminal
awplus(config)# no log console
Related
commands
default log console
log console (filter)
log console exclude
show log config