Allied Telesis IE340-20GP - Alarm Monitoring Commands; Introduction

14
C613-50631-01 Rev A Command Reference for IE340 Series 528
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Alarm Monitoring
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
alarm monitoring. For more information, see the Alarm Monitoring Feature
Overview and Configuration Guide.
Command List •“alarm facility epsr led” on page 530
•“alarm facility epsr relay” on page 531
•“alarm facility g8032 led” on page 532
•“alarm facility g8032 relay” on page 533
•“alarm facility input-alarm alarm-position” on page 534
•“alarm facility input-alarm led” on page 535
•“alarm facility input-alarm relay” on page 537
•“alarm facility link-down led” on page 539
•“alarm facility link-down relay” on page 540
•“alarm facility loopprot led” on page 541
•“alarm facility loopprot relay” on page 542
•“alarm facility main-pse led” on page 543
•“alarm facility main-pse relay” on page 544
•“alarm facility power-supply led” on page 545
•“alarm facility power-supply relay” on page 546
•“alarm facility pse-port led” on page 547
•“alarm facility pse-port relay” on page 548
•“alarm facility temperature led” on page 550
•“alarm facility temperature relay” on page 551