Allied Telesis IE340-20GP - show flowcontrol interface

C613-50631-01 Rev A Command Reference for IE340 Series 599
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
SHOW
FLOWCONTROL INTERFACE
show flowcontrol interface
Overview Use this command to display flow control information.
Syntax
show flowcontrol interface <port>
Mode User Exec and Privileged Exec
Example To display the flow control for port1.0.3, use the command:
awplus# show flowcontrol interface port1.0.3
Output Figure 15-1: Example output from the show flowcontrol interface command
for a specific interface
Parameter Description
<port> Specifies the name of the port to be displayed.
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- ------- -------- ------- -------- ------- -------
port1.0.3 on on on on 0 0