Allied Telesis IE340-20GP - show vlan classifier group interface

C613-50631-01 Rev A Command Reference for IE340 Series 653
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
SHOW
VLAN CLASSIFIER GROUP INTERFACE
show vlan classifier group interface
Overview Use this command to display information about a single switch port interface for
all configured VLAN classifier groups.
Syntax
show vlan classifier group interface <switch-port>
Mode User Exec and Privileged Exec
Usage notes All configured VLAN classifier groups are shown for a single interface.
Example To display VLAN classifier group information for switch port interface port1.0.2,
enter the command:
awplus# show vlan classifier group interface port1.0.2
Output Figure 16-7: Example output from the show vlan classifier group interface
port1.0.1 command:
Related
commands
vlan classifier group
show vlan classifier interface group
Parameter Description
<switch-port> Specify the switch port interface classifier group identifier
vlan classifier group 1 interface port1.0.1