C613-50631-01 Rev A Command Reference for IE340 Series 824
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
POWER OVER ETHERNET COMMANDS
SERVICE
POWER-INLINE
service power-inline
Overview This command enables Power over Ethernet (PoE) globally on the switch, for all
PoE ports.
Syntax
service power-inline
no service power-inline
Default PoE functionality is enabled by default
Mode Global Configuration
Examples To disable PoE, use the following commands:
awplus# configure terminal
awplus(config)# no service power-inline
To re-enable PoE, if PoE has been disabled, use the following commands:
awplus# configure terminal
awplus(config)# service power-inline
Related
commands
show power-inline
show running-config power-inline
Command
changes
Version 5.4.8-0.2: added to x550 series products
To Next Page
Loading...
