Allied Telesis IE340-20GP - Page 831

C613-50631-01 Rev A Command Reference for IE340 Series 831
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE COUNTERS
Related
commands
clear power-inline counters interface
show power-inline
show power-inline interface
Command
changes
Version 5.4.8-0.2: added to x550 series products
Overload The number of instances when a PD exceeds its configured power
limit (as configured by the power-inline max command). Also
increments pethPsePortOverLoadCounter in the PoE MIB.
Short The number of short circuits that have happened with a PD. Also
increments pethPsePortShortCounter in the PoE MIB.
Invalid The number of times a PD with an Invalid Signature (where the PD
has an open or short circuit, or is a legacy PD) is detected. Also
increments pethPseInvalidSignatureCounter in the PoE
MIB.
Denied The number of times a PD has been refused power due to power
budget limitations for the PSE. Also increments
pethPsePortPowerDeniedCounter in the PoE MIB.
Table 2: Parameters in the show power-inline counters command output
Parameter Description