Allied Telesis IE340-20GP - ipv6 nd retransmission-time

C613-50631-01 Rev A Command Reference for IE340 Series 981
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 COMMANDS
IPV
6 ND RETRANSMISSION-TIME
ipv6 nd retransmission-time
Overview Use this command to specify the advertised retransmission interval for Neighbor
Solicitation in milliseconds between IPv6 Routers.
Use the no variant of this command to reset the retransmission time to the default
(1 second).
Syntax
ipv6 nd retransmission-time <milliseconds>
no ipv6 nd retransmission-time
Default 1000 milliseconds (1 second)
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Examples To set the retransmission-time of Neighbor Solicitation on the VLAN interface
vlan2 to be 800000 milliseconds, enter the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# ipv6 nd retransmission-time 800000
To reset the retransmission-time of Neighbor Solicitation on the VLAN interface
vlan2 to the default 1000 milliseconds (1 second), enter the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 nd retransmission-time
Related
commands
ipv6 nd suppress-ra
ipv6 nd prefix
Parameter Description
<milliseconds> Time period in milliseconds. Valid values are from 1000 to
3600000.