C613-50631-01 Rev A Command Reference for IE340 Series 984
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 COMMANDS
IPV
6 ND SUPPRESS-RA
ipv6 nd suppress-ra
Overview Use this command to inhibit IPv6 Router Advertisement (RA) transmission for the
current interface. Router advertisements are used when applying IPv6 stateless
auto-configuration.
Use the no parameter with this command to enable Router Advertisement
transmission.
Syntax
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Default Router Advertisement (RA) transmission is suppressed by default.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To enable the transmission of router advertisements from vlan2 on the device, use
the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 nd suppress-ra
Related
commands
ipv6 nd ra-interval
ipv6 nd router-preference
ipv6 nd prefix
To Next Page
Loading...
