Allied Telesis Rapier i AT-RP16Fi/SC - Operating the Switch; User Accounts and Privileges

Chapter 4
Operating the switch
This Chapter
This chapter introduces basic operations on the switch, including:
■ “User Accounts and Privileges” on page 45
■ “Normal Mode and Security Mode” on page 47
■ “Remote Management” on page 50
■ “Storing Files in FLASH Memory” on page 51
■ “Using Scripts” on page 52
■ “Loading and Uploading Files” on page 53
■ “Upgrading Switch Software” on page 57
■ “Using the Built-in Editor” on page 61
■ “SNMP and MIBs” on page 62
User Accounts and Privileges
The switch software supports three levels of privilege for users: USER,
MANAGER, and SECURITY OFFICER. By default, the switch has one account
(manager) defined with manager privilege and the default password friend. The
commands that a user can execute depends on the user’s privilege level and
whether the switch is operating in normal or security mode (see “Normal Mode
and Security Mode” on page 47). A USER level prompt looks like:
>
while a MANAGER prompt looks like:
Manager >
and a SECURITY OFFICER prompt looks like:
SecOff >
The MANAGER level has access to the full set of commands when the switch is
in normal mode. When the switch is operating in security mode, users with
MANAGER privilege cannot execute a subset of the commands known as the
security commands (see “Normal Mode and Security Mode” on page 47).