Allied Telesis SwitchBlade x3100 Series - Page 140

Introduction CFC Media (SD Card)
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-110
SHOW MEDIA
Syntax
SHOW MEDIA [ ={ unit-list | ALL } ] [ FULL ]
Description Displays information for the specified media card(s). The information that can be dis-
played includes: the Parent Card slot number, the media card’s type, state, status, model/
serial number, firmware version, number of sectors, and number of bytes per sector.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
show media full
-------------------------------------------------------------
Device Name SD4
Fault No Faults
Parent Card 4
Card Type SD MEDIA
State UP
Status Online
Serial Number 2156096975
Firmware Version 8.0
Number of Sectors 15523840
Bytes per Sector 512
Model SD08G
--------------------------------------------------------------
--------------------------------------------------------------
Device Name SD5
Fault No Faults
Parent Card 5
Card Type SD MEDIA
State UP
Option Description Default Value
MEDIA Used to select the:
unit-list - A specific SD unit or a list of SD units.
ALL - all available media cards
FULL When the FULL option is specified, extra information
about each media card is shown:
- Serial Number
- Firmware Version
- Number of Sectors
- Number of Bytes per Sector