Logging Procedures Introduction
1-179
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Example
SET LOG OUTPUT=terminal CLI FORMAT=MSGONLY
MINORFA-
CILITY
The log facility that minor syslogs are sent to. The pos-
sible values are 0-7, indicating LOCAL0-LOCAL7 or
DEFAULT.
LOCAL2
INFOFACIL-
ITY
The log facility that informational syslogs are sent to.
The possible values are 0-7, indicating LOCAL0-
LOCAL7 or DEFAULT.
LOCAL2
FILE unit:filename-pattern - the specific SD unit
and the pattern (in 14.1, only the SD unit on the active
CFC unit can be specified
The FORMAT meanings are the same as for the CLI
OUTPUT
The outputid is a name
associated with the destina-
tion for the logs. The destination can be a terminal
or SYSLOG server. The outputid can also define
the log format.
Option Description Default Value
To Next Page
Loading...
