Allied Telesis SwitchBlade x3100 Series - Page 210

Introduction Logging Procedures
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-180
SHOW LOG FILTER
Syntax
SHOW LOG FILTER
Description displays all the existing management log filters in the system. The log filter name, the log
categories filtered, if any, and the severity values filtered are displayed by this command.
Options N/A
Example
SHOW LOG FILTER
--- Management Log Filters ---------------------------------------------------
Filter ID Categories Severities
------------------------- ------------------------- -------------------------
1 CLI Critical Major Minor None
2 PORT Critical Major Minor None