Introduction ECO Functions and Lamp Test
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-188
When exiting ECO mode (mode transition from ON to OFF), all applicable LEDs will illuminate in alternating
colors for 3 seconds (also effectively a lamp test), then return to their appropriate normal states (as per tables
above)
Alternating colors means that the LEDs alternate green/amber, with each color showing for 200 milliseconds,
during the 3 second lamp test period. Note that the XE4 port LEDs do not have an amber color, so during
lamp test they appear as solid green for the 3 second lamp test period.
To Next Page
Loading...
