Allied Telesis SwitchBlade x3100 Series - Page 474

Introduction EPSR and (R)STP Interaction
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-154
DELETE EPSR INTERFACE
Description Deletes an Interface from the already existing EPSR domain. This operation is only
allowed when the EPSR domain is disabled.
Syntax
DELETE EPSR={ epsrdomain-list | ALL } INTERFACE={ type:id-range |
id-range | ifname-list | ALL }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
DELETE EPSR=allied-1 INTERFACE=ETH:[8.3]
Option Description Default Value
EPSR The name(s) that has been given to the EPSR
domain(s)
N/A
INTERFACE The interfaces that will be deleted from the EPSR
domain.
N/A