EPSR Trace IGMP Counters
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
8-28
8.7.1 ESPR TRACE Command List
These commands add tracing parameters for ESPR. The parameters, when specified together in a single com-
mand, are taken to have a logical connection of “both.” Multiple invocations of this command have a logical con-
nection of “either.” If parameters are not specified, “all” is assumed.
TABLE 8-5 EPSR TRACE Commands
Commands
ADD TRACE EPSR
DELETE TRACE EPSR
SHOW TRACE EPSR
To Next Page
Loading...
