Specifications
69Alvium G1 User Guide V1.7.0
ROI frame rates
Values are based on the conditions defined in Specified values on page 53.
Image format
Width
[pixels]
Height
[pixels]
ROI area
[MP]
Frame rate [fps]
1
122 MByte/s 12 MByte/s
Full resolution 1296 1032 1.337 86.3 / 43.3 / 43.4 8.6 / 4.3 / 4.3
SXGA 1280 1024 1.311 88.3 / 44.2 / 44.2 8.8 / 4.4 / 4.4
HD 720 1280 720 0.922 122.9 / 61.7 / 61.6 12.3 / 6.2 / 6.2
XGA 1024 768 0.786 144.5 / 72.5 / 72.5 14.5 / 7.3 / 7.2
SVGA 800 600 0.480 218.3 / 116.9 / 116.4 23.4 / 11.8 / 11.7
VGA 640 480 0.307 268.4 / 179.2 / 142.9 36.0 / 18.1 / 18.0
HVGA 480 320 0.154 384.8 / 342.1 / 205.1 69.0 / 34.7 / 34.6
QVGA 320 240 0.077 494.0 / 457.2 / 262.7 132.4 / 66.5 / 66.4
HQVGA 240 160 0.038 686.4 / 634.4 / 365.0 243.6 / 123.2 / 122.8
QQVGA 160 120 0.019 849.9 / 789.2 / 454.6 453.6 / 229.3 / 228.6
Max. × half 1296 516 0.669 163.3 / 82.3 / 82.2 16.5 / 8.3 / 8.2
Max. × min. 1296 8 0.010 1512.1 / 796.5 / 784.2 173.1 / 87.1 / 86.9
Min. × max. 8 1032 0.008 132.4 / 123.0 / 70.4
Min. × min. 8 8 64 P 2644.2 / 2455.3 / 1405.9
1
Mono8 at SensorBitDepth = 8-Bit
(2)
/ Mono10 at SensorBitDepth = 10-Bit /
Mono12 or at
SensorBitDepth = 12-Bit
2
The SensorBitDepth value must be set separately from PixelFormat.
See Sensor ADC readout modes for maximum frame rates on page 54 for details.
Table 23: Alvium G1-130 VSWIR ROI frame rates