19
Connecting FPC cables
Alvium Cameras Accessory Guide
See https://www.alliedvision.com > Support > Technical
Documentation > Alvium CSI-2 cameras
Figure 1 shows how the
FPC cable connects to
the FPC connector.
Follow the instructions
to connect the FPC cable
to the camera and to the
embedded board.
FPC cable and FPC connector (in open posit ion)
Figure 1: FPC cable and FPC connector (open position)
1. Opening the FPC
connector: With your
fingernail, flip the
actuator to open
position at 105° to the
PCB surface, see
Figure 2.
Figure 2: Opening the FPC connector
To Next Page
Loading...
