Allis-Chalmers 400 Series - To Our Customer

TO OUR CUSTOMER
The following pages and illustrations are printed to help supply you with the knowledge to
better operate and service your new ALLIS-CHALMERS equipment.
We are proud to have you as a customer and feel you will be proud to be an ALLIS-
CHALMERS owner.
Any piece of equipment needs, and must have a certain amount of service and maintenance
to keep it in top running condition. We have attempted to cover all the adjustments
required to fit most conditions; however, there may be times when special care must be
taken to fit a condition.
Study your manual carefully and become acquainted with all the adjustments and operating
procedures before attempting to operate your new equipment. Remember, it is a machine
and has been designed and tested to do an efficient job in most operating conditions and
will perform in relation to the services it receives.
If special attention is required for some conditions, ask your ALLIS-CHALMERS dealer;
his Parts and Service Organization will be glad to help and answer any questions on oper¬
ation and service of your new machine.
A ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
This symbol is used to call your attention to safety precautions that should be followed by
the operator to avoid accidents. When you see this symbol - Heed Its Warning.
BE A SAFE OPERATOR Z
AVOID ACCIDENTS BY •
THINKING BEFORE ACTING •
AND BY READING YOUR OPERATORS MANUAL •
......
NOTE: Some illustrations in this manual show units wjoptional equipment installed.
This optional equipment may be purchased from your local Allis-Chalmers dealer.