To Next PageTo Next Page
Need help?Do you have a question about the Allmatic KALOS XL Series and is the answer not in the manual?
General| Power Supply | 230V AC |
|---|---|
| Motor Voltage | 24V DC |
| Max Door Height | 2.5 m |
| Protection Class | IP44 |
| Speed | 0.15 m/s |
| Remote Control | Yes |
| Battery Backup | Optional |
| Warranty | 2 years |
| Max Door Weight | 100 kg |
| Motor Type | DC |
| Lifting Capacity | 100 kg |
Follow all safety instructions for installation, operation, and maintenance by qualified personnel.
Perform pre-installation checks, verify gate movement, and ensure correct electrical and ground connections.
Ensure proper maintenance by skilled persons and correct system grounding for safe operation.
Visual representation of the gate automation system components and their layout.
Detailed technical features for different KALOS XL models, including weight, speed, and power.
Secure the base plate using anchors or concrete, ensuring space for power lines.
Position and fit the motor onto the base plate, ensuring correct alignment with the gate.
Adjust gearmotor height using screws for proper alignment with the rack, if needed.
Fix the rack at the correct height and position the gearmotor for optimal meshing with the rack.
Install cams on the rack to define gate travel length and tighten screws for secure fitting.
Install and connect magnetic hall limit switches according to specifications and wiring diagrams.
Configure control unit parameters for magnetic limit switches based on model specifications.
Ensure correct gate positioning and learn how to manually release the gearmotor for gate movement.
Follow local regulations for proper disposal of the automation product and its components.
Understand the terms and conditions of the product warranty, including coverage and limitations.
